Can anyone help me with why I am missing the thread info and the Callout Variables button on the new drawing sheets I am trying to create ?
Below is a screen grab of an old and new drawing file open and the hole callout selected, for some reason the thread info at the hole callout and the Callout variables button is missing in the new file ?
Yes it is using a hole callout. There is no dimensions added manually.
And i see what you mean re the hole callout not calling the correct hole wizard codes. It appears as if the link between the hole wizard info and the hole callout is somehow broken.
Think I might try a fresh install. Thanks
Is this a mirrored component? Or was the hole created via a mirror command?
Edit: Figured I should add some background here.
I have seen this with mirrored holes. My solution is to NEVER use mirror with a hole that I am going to use hole callout on. Mirror other geometry and then add the hole afterwards using the wizard.
No no mirroring involved
If that DIM in the right image was added using a hole-callout your SW is broken, that is not the hole callout manager showing, that's the dimension manager. I would bet the depth and countersink details were added manually, the numeric 19.75 and 90 would be <hw-depth> <hw-csdia> X <hw-csang> otherwise.