How do I get the Sheet/Row tag to be in consecutive order (example 13-2,13-3,13-4,13-5,13-6 instead of 13-2,13-5,13-7,13-10,13-12)?
How can I produce more Sheet/Row tags on my sheet?
Reginald, the numbering you see is coming from 2 places:
first, the Title Block has a section in it's properties that does the "background math" on the row/column spacing. Make sure these spacings match the ACTUAL separation of those row/column tags in your title block. Just looking at your results, I'd say that's what's making your numbering off, get out your calculator and get the row calculations to match the reality of your attribute spacing.
After that, take a look at your formula for the rows & columns in the project configuration to see if you need to do any operations to the numbering (switch to letters, add sheet number info etc.)
I was curious if this was of help to you?
You will need to edit the Row formula generator under your project configurations.
There are some default formulas that you can use or customize them to fit your project.
Scott, we picked up and solved this in another thread, the problem was the row calculations on the title block were slightly off.
In this case there was no reason to use the row formula as #ROW_TAG was not being used on the title block.
Retrieving data ...