I want to cut a thread on Allen Bolt by using toolbox data. I wish to know whether this information is adequate to sketch a cutting profile.
ISO 4762 M6 x 10 – 10S
Thread Pitch 10 mm does not seem a realistic one.
The 10 is the length of the screw, it clearly says that in the info box you posted. Change to different lengths & you will see the configuration name change.
The normal pitch for an M6 screw is 1.0mm by the way.
You're correct, I believe the ISO standard defaults to coarse pitches for all nominal sizes, so there's no need to provide the pitch in the description.
Retrieving data ...