AnsweredAssumed Answered

Screenshot from a solid work project

Question asked by Chri Leutgeb on Dec 8, 2017
Latest reply on Dec 9, 2017 by Chri Leutgeb

Like • Show 0 Likes0
Comment • 13

Hello everyone, I am writing a worksheet for students - and therefore I would like to have a screenhot showing a solid works project (a metal workpiece, a mould or something like this). I would really appreciate, if anyone could send me such a Screenshot. Unfortunately I do not have access to solid works in an English version. However, For the worksheet I need a screenshot from a project that shows the English solid works edition! For further questions please contact me: ch.leutgeb[at]gmail.com Thank you very much!! Chris

Chri Leutgeb Dec 8, 2017 8:01 AM

Correct Answer

Hi Kevin,

Thank you for your quick response!!

Yes, it would be nice, if we can see the application in use (the drawing, the menu,...)

During the exersise we will talk about CAD in generel and it would be nice if there are geometriacal shapes in the drawing ...

The students should try to find as many shapes as possible in the drawing (circle, triangle, rectangle aso)

But renderings are also nice.

I am happy about any screenshot showing the application in use and a drawing.

Thanks a lot...

See the reply in context

No one else had this question

Outcomes

Kevin Chandler Dec 8, 2017 7:21 AM

Hello,

For the benefit of those who will send images, would you also like renderings?

Cheers,

Kevin

Actions

Chri Leutgeb @ Kevin Chandler on Dec 8, 2017 8:01 AM

Hi Kevin,

Thank you for your quick response!!

Yes, it would be nice, if we can see the application in use (the drawing, the menu,...)

During the exersise we will talk about CAD in generel and it would be nice if there are geometriacal shapes in the drawing ...

The students should try to find as many shapes as possible in the drawing (circle, triangle, rectangle aso)

But renderings are also nice.

I am happy about any screenshot showing the application in use and a drawing.

Thanks a lot...

Actions

Paul Risley Dec 8, 2017 8:31 AM

Not rendered, but an example of the software in use on a job.

Actions

Christopher Estelow @ Paul Risley on Dec 8, 2017 8:39 AM

Paul,

Is that a weld fixture? Very nice work!!

Chri,

Below is a screenshot of a part and a drawing I made from the part if it helps at all.

Chris

Actions

Paul Risley @ Christopher Estelow on Dec 8, 2017 9:02 AM

Christopher Estelow wrote:

Paul,
Is that a weld fixture? Very nice work!!

Chri,
Below is a screenshot of a part and a drawing I made from the part if it helps at all.

Chris

Chris that is a powered rollover weld fixture for an endloader frame weldment. That is about 1/2 of our business making fixtures for industrial manufacturers.

Actions

Chri Leutgeb @ Christopher Estelow on Dec 9, 2017 3:58 PM

THANK YOU!!!!

Actions

Chri Leutgeb @ Paul Risley on Dec 9, 2017 3:58 PM

Thank you very much!!!!!

Actions

Dan Pihlaja Dec 8, 2017 8:50 AM

Here is a screenshot of an electro-chemical deburr fixture

And a screenshot of the print:

(there are more pages to this print, but I can only share this one)

Actions

Chri Leutgeb @ Dan Pihlaja on Dec 9, 2017 3:58 PM

Thank you!!

Actions

Christopher Estelow Dec 8, 2017 9:02 AM

Here is a little over-molding fixture I made for a vacuum tube connector.

Chris

Actions

Paul Risley Dec 8, 2017 9:10 AM

Below is a model and it's drawing. This fixture required 2 operations where the parts are assembled in one position and welded then rotating those welded parts about a central axis to re-position and add additional hubs to weld the final structure.

Actions

Chri Leutgeb @ Paul Risley on Dec 9, 2017 3:58 PM

Thank you very much!!!!!

Actions

Chri Leutgeb Dec 9, 2017 3:58 PM

Thank you very much everyone for your screenshots!!!

Actions

13 Replies

Kevin Chandler Dec 8, 2017 7:21 AM
Mark Correct
Correct Answer
Hello,

For the benefit of those who will send images, would you also like renderings?

Cheers,

Kevin
Like • Show 1 Like1
Actions
- Chri Leutgeb @ Kevin Chandler on Dec 8, 2017 8:01 AM
  Unmark Correct
  Correct Answer
  Hi Kevin,
  Thank you for your quick response!!
  Yes, it would be nice, if we can see the application in use (the drawing, the menu,...)
  During the exersise we will talk about CAD in generel and it would be nice if there are geometriacal shapes in the drawing ...
  The students should try to find as many shapes as possible in the drawing (circle, triangle, rectangle aso)
  But renderings are also nice.
  I am happy about any screenshot showing the application in use and a drawing.
  Thanks a lot...
  Like • Show 1 Like1
  Actions
Paul Risley Dec 8, 2017 8:31 AM
Mark Correct
Correct Answer
Not rendered, but an example of the software in use on a job.
Like • Show 2 Likes2
Actions
- Christopher Estelow @ Paul Risley on Dec 8, 2017 8:39 AM
  Mark Correct
  Correct Answer
  Paul,
  Is that a weld fixture? Very nice work!!
  
  Chri,
  Below is a screenshot of a part and a drawing I made from the part if it helps at all.
  
  Chris
  Like • Show 1 Like1
  Actions
  - Paul Risley @ Christopher Estelow on Dec 8, 2017 9:02 AM
    Mark Correct
    Correct Answer
    Christopher Estelow wrote:
    
    Paul,
    Is that a weld fixture? Very nice work!!
    
    Chri,
    Below is a screenshot of a part and a drawing I made from the part if it helps at all.
    
    Chris
    Chris that is a powered rollover weld fixture for an endloader frame weldment. That is about 1/2 of our business making fixtures for industrial manufacturers.
    Like • Show 2 Likes2
    Actions
  - Chri Leutgeb @ Christopher Estelow on Dec 9, 2017 3:58 PM
    Mark Correct
    Correct Answer
    THANK YOU!!!!
    Like • Show 1 Like1
    Actions
- Chri Leutgeb @ Paul Risley on Dec 9, 2017 3:58 PM
  Mark Correct
  Correct Answer
  Thank you very much!!!!!
  Like • Show 1 Like1
  Actions
Dan Pihlaja Dec 8, 2017 8:50 AM
Mark Correct
Correct Answer
Here is a screenshot of an electro-chemical deburr fixture

And a screenshot of the print:
(there are more pages to this print, but I can only share this one)
Like • Show 2 Likes2
Actions
- Chri Leutgeb @ Dan Pihlaja on Dec 9, 2017 3:58 PM
  Mark Correct
  Correct Answer
  Thank you!!
  Like • Show 1 Like1
  Actions
Christopher Estelow Dec 8, 2017 9:02 AM
Mark Correct
Correct Answer
Here is a little over-molding fixture I made for a vacuum tube connector.
Chris
Like • Show 1 Like1
Actions
Paul Risley Dec 8, 2017 9:10 AM
Mark Correct
Correct Answer
Below is a model and it's drawing. This fixture required 2 operations where the parts are assembled in one position and welded then rotating those welded parts about a central axis to re-position and add additional hubs to weld the final structure.
Like • Show 2 Likes2
Actions
- Chri Leutgeb @ Paul Risley on Dec 9, 2017 3:58 PM
  Mark Correct
  Correct Answer
  Thank you very much!!!!!
  Like • Show 1 Like1
  Actions
Chri Leutgeb Dec 9, 2017 3:58 PM
Mark Correct
Correct Answer
Thank you very much everyone for your screenshots!!!
Like • Show 1 Like1
Actions

Screenshot from a solid work project

Outcomes

Related Content

Recommended Content