Slot center mark is selected. An image is displayed on a toolbar that has a slot and a center mark. Why isn't the mark centered when I select an arc?
I used construction lines to fine the center point. I will apply a basic dimension to the center mark. Thank you for the help all.
I believe that option only supports slots made with the slot sketch entity or maybe only with the hole wizard slots.
Was this slot made with the slot sketch or hole wizard slot?
If not, then it will only recognize the arcs on the ends. So, in essence what you did was place a center mark on the arc on the right end of the slot.
Extruded cut was made.
but how was the shape sketched?
yep. that is a collection of lines and arcs, not a slot (at least as far as the center mark tool is concerned). if you need the center mark at the center of the slot, replace these lines and arcs with a slot sketch entity.
2017 SOLIDWORKS Help - Slots
Dustin, can you just change it from a cut to a slot feature or do you have other features tied to it?
even if other features are tied to this one, that does not prevent redefining this one. those references can be repaired.
Retrieving data ...