Hi everyone, I'm trying to draw this part and I'm having difficulties in the notching. see pics and attached file.
We can't open the Assembly without the Parts, but it looks like a simple triangular cut (or am I missing something)?
Maybe the weldment function will help you get a quick solution. A quick sketch for the pre-defined profile to follow and you get each segment cut for you.
If I were to do it without using weldments I would add a plane right on the seam and then use that to extrude up to from each end, then you'll have a perfect angle cut.. If you want a gag, then offset a set of planes...
Define that plane by Midplane constraint between two similar faces of the bodies, either inner face pair or outer face pair but not parallel faces.
I'd use that plane to trim (Weldments Feature, not the parts feature Split) instead of properly projecting upon it, because Russell already has that bit modeled.
I.e., add to what is already there, and modify upon it instead of altering how what is there is generated.
All the same, I'd do this task in Weldments as Nando suggests. Automatic is always easier.
Retrieving data ...