How to create this detail is solidworks drawing if only the part is straight it will just be section but the problem is the part is curve, Thanks
if you are after just the section then i would recommend ticking the "Slice Section" tick box to achieve this.
I believe Solidworks will section the view wherever you draw the section line, regardless of whether the part is curved or straight.
Although just a quick example hopefully this is what you are kind of after?
with angled section views you can use the below section view type
then place the section view where ever you like (to place it unaligned) so its not fixed if you hold down CTRL on the keyboard before you place it you can move it freely.
If you then wanted to you can add centrelines for construction geometry using the sketch tab.
Hopefully that can point you in the right direction
2017 SOLIDWORKS Help - Inserting a Section View
Good morning Jaja,
If you set your section depth to some very small number, does that fix your issue?
yeah that what i'm looking
Retrieving data ...