Is there anyone having CSWP exam for preparation? I need it for practice before taking the real exam....,,,,,???
Google is your friend...it doesn't take much.
The SOLIDWORKS Certification Center link that Kevin Pymm provided is where I send everyone - if you fully understand all of the items that they list as being on the test, you will do just fine.
Dear @Todd Blacksher I need help for segment 2 and 3 of the exam as official sample exam provide help only for segment 1.
There is a TON of great information here: http://my.solidworks.com/training/path/17/cswp-exam-prep-course?fromrss=1
Basically you will want to be VERY COMFORTABLE with each of the items in the list for each section -
need help for segment 2 and 3 as official sample exam offer only segment 1
Check this post for additional resources/link https://forum.solidworks.com/message/432474#comment-432474
In addition you can do a practice run on the virtual tester also
I have not seen a "practice run" option on the Virtual Tester. Please explain how that is handled. I aced segments 1 and 2, and have no real worries about segment 3, but it's always nice to have a practice run if there's one available.
There is a SW Sample Exam - CSWP Segment 1 when you log into the Tangix TesterPro Client (picture below), but nothing for segments 2 and 3.
Andrew, the sample exam is only for CSWP segment 1 when you log into Tangix TesterPro Client. You may check the following videos for samples
CSWP Segment 3 Sample Exam
CSWP Segment 3 Sample Exam-1
16-12 Solidworks Tutorial | CSWP segment 3 | Practice Test
Thanks for the update, Deepak...
No worries here, I aced the 3rd segment, too. However, I'm sure there are others that will appreciate knowing there are additional practice resources out there.
A number of these certification exams contain circumstances that are a little obscure with regard to real-life application, but I have to say, the CSWP didn't contain anything an experienced user would find greatly unusual.
Tip for segment 2: Run through the Design Tables tutorial on Solidworks.
Retrieving data ...