when I am creating two or more configuration with different part and try to give
ballon to those part , part quantity shown as dash.
i attached snapshot.
give me some solution
To me it looks like ballon reflects the current configuration (as it should be).
Can you up load drawing and the parts that go with the drawing?
i attached assembly & drawing file.
in assembly i created more than one configuration with one different part.
In drawing i dropped 4 configuration iso view.
The part(s) is suppressed in that configuration. Unsuppress them and the dash goes away.
ya i know that part is supressed.
I don't want to suppress part because i don't want that part in that configuration.
that's why I created configuration
It may be that you need to remove part from BOM in one configuration and not in others.
Okay so you want the part suppressed. If you look at your BOM, the qty for item 12 is a dash so the balloon will be a dash. I do not use BOMs like yours so here is my best guess. Create a dummy configuration with all the parts unsuppressed and have its qty column be the first column in your BOM. Then hide that column. You will probably need to experiment.
Retrieving data ...