Can one of the #Task functions like replace sheet format be used to replace the Revision Table with a different template as well as the Title Block? If so how can this be done?
Yes, download the modules from the site
They have both reload sheet & replace sheet
Add Revision will allow you to load a new revblock with a new template
Thanks for the help. Do you have any idea what would be causing me to get the following errors when I run Replace Sheet Format:
I tried to find the option to 'Open Read Only' and 'Allow resaving to newer versions' but could find them in the settings. Thanks
Contact Viktor Bovzdarenko - he is from the #Task Team
Read only/Write Toggle
Allow Saving to newer versions....
Ryan Dayton 0599 take a look at the picture below. I believe the red circled area will help you with your filter problem. For what you are trying to do you will need to load drawing files but also make sure to select that you want to update drawing files where I circled in red. If slddrw doesn't show up then it won't update drawings. The second area in blue is where you switch between read/write access of files. If you are printing a drawing for example you will only need to open it as a read but if you want to save the file you will need to open it as write. This blue circled area switches between R & W for Read/Write. I hope that helps.
I ran it again and both of those things were the same as what you have above. Could the problem be that in the "Arguments" pane it is asking for "Full Template Name with drt extension"?
Ryan Dayton 0599 I haven't used the update drawing templates before so my troubleshooting will be limited here. Typically you will need to fill out all information fields in the Arguments section for each of the Tasks that you are running. Make sure to check each Task with a checkmark beside them to see if their Arguments are filled out. Maybe Cad Admin has run this specific task before and can give you more specific direction.
Yes you need the full path including filename with extension for both the Sheet replace & the Add Revision. The [...] Browse button should allow you to look for, select, and fill in the fields automatically.
Does the extension need to be .drt or can I use drawings that are not templates and replace them with a template?
*.slddrt for Replace Sheet
*.sldrevtbt for Add Revision
Retrieving data ...