Is there any way to get second picture like a part? That means hiding all the lines.
Not sure why your's is green, must be a system setting somewhere.
In my first example above I was using your assembly & the colours were blue, purple & turqoise.
In the example below I used your multi-body part & my colours are still blue, purple & turqoise.
Check your colour settings in the following window & try to locate the green one, change it & see if it makes a difference. I'm not sure which one it will be, the highlighted one is just an example.
Tangent Lines Removed - RMB drawing view
This is in the feature mode.
Can you post the model.
SOLIDWORKS – Lip Groove - YouTube
Time around 3.10
As far as I know you can't hide those lines, they are part of the feature selection process & indicate which bits of your Part/Assembly have been picked for the different features & where the Lip & Groove will be. If the image you show above is your box, I'm not sure why you are getting the lines across the middle as your box is continuous.
Problem is my one is glowing green color but video is not that is the problem.
Thank you for your help.
Why did you Select item 4?
I explained above it was just an exmple, I don't know which one it will be, if any.
Retrieving data ...