What is the reason some columns are blank in the table?
Check your Cut-List properties here:
You need to make sure you have a description for them:
The ones with the blank cells/values are the one made using non-weldment profile. So you need to fill in the properties into the model cut list to get them in drawing OR update them to weldment profile.
Add bounding boxes to those bodies in the cut list and most of the properties would appear.
What is meant by non-weldment profile?
I meant is profile created by using other than structural member tool.
Bodies not created using weldment tool but instead were created using other features, for e.g. extrude.
I meant profile created by using other than structural member tool.
Have you looked at the actual properties in the model? That's where your issue is.
Have you tried to right click on the item in the Cut List tree and create the bounding box? That should populate the cells.
I am sorry I tied up with other things I will try your advice later.
Add bounding boxes to those bodies int he cut list and most of the properties would appear.
Just make sure you are using a part template derived from 2016 or 2017 for this to work !!
I assume the Description property is present in the upper rows because those bodies were created with profile sketches that had the Description property in them, so they carried over as cut list properties. The others weren't.
Retrieving data ...