I am doing modelling for this model, and I am confused between the order of the steps to make this front....which one should be applied first, and then further order between chamfers, sweep cut, and extrude...I will be very thankful if someone guide me. Thanks
If you don't even know how to begin I would suggest going through the built in SolidWorks tutorials & any you can can find on YouTube before trying to tackle something this complex. Then when you have done that & produced an initial model, post it here with some more details of what you want & someone will take a look & give you some pointers.
Good place to start is with simple things like circles, rectangles and triangles - either get training or watch training videos... Plus there are vehicles on www.grabcad.com you may want to download..
This makes me think SW needs a hammer feature Hammering Droog Chairs, TechnoCRAFT @ YBCA - YouTube
With currently available features though, I would sketch it out, find the underlying geometry,do the basic SW tutorials, plan my extrudes and cuts, maybe start with a construction sketch or two. Probably only model half to save myself some time and mirror it.
Thankyou very much guys, happy to hear the response from the elders....after hours of brain storming, I made it myself, now I will refine it Cheers!
If you don't even know how to begin I would suggest going through the built in SolidWorks tutorials & any you can can find on YouTube before trying to tackle something this complex. Then when you have done that & produced an initial model, post it here with some more details of what you want & someone will take a look & give you some pointers.