-
-
Re: Need help at Import/Export
You need to upload these parts also in order to open/export.
And here is view only file
John, did you gave it a little twist?
-
-
Re: Need help at Import/Export
..suggest you download/install the free "edrawings".. you can open the assembly (hide the sheath) and save as a stl.
-
Re: Need help at Import/Export
It worked, weird is that its only 1% of the Size. I can Scale it up but...why?
-
Re: Need help at Import/Export
Dennis,.. yes,.. it is not uncommon for the scale to be incorrect.. and it is most likely 1/1000 (meters/mm)?
Let me test... yes, for me, it measures 1330mm in eDrawings.. and the stl imports into Rhino3D and MeshLab show "1.3" units,... so, depending on the units you are using, you "may" need to scale it.... and per you message, it sounds very small... then, you are probably using mm.. so, scale it X1000.
and.. not sure what program you are opening this in but you would need to verify size and scale the parts in that other program.
-
-
-
Re: Need help at Import/Export
Like Paul said, you can open the files with eDrawings Viewer (free to install/use) and can save as STL.
Anyway I've attached the STL file.
-
-
