I am working on a drawing sheet with sections on it. the section view is not doing the aligning of features such as holes and keyways. how do I fix this so it creates these drawing correctly?
Are you using a jogged section?
I am using an aligned section. I do not see a jogged section type
What I'm getting at is did you sketch the cut section then use the "Section View"?.. does it look like the section is unfolding and making the part larger? Or is the entire section off vertically or horizontally?
It look like jogged section.
RMB on the drawing border and select "alignment". Select the alignment type, then select the view you want it aligned to.
Most of the time, alignment by origin works best. Not sure why the original section view isn't lined up, but give it a try.
when there are features that are not aligned on the section line, for example a hole or a keyway, the section drawing does not align them to the plane like it should.
Can you show us an example picture? I can't picture in my head what you are referring to.
Can you add a screenshot of your issue.
i added a pdf to the orignal post
It looks like it is unfolding. Do you have these options?
Pick Foreshorten view.
Delete the section view then draw a sketch like shown in red below. Select the sketch and then right click, Drawing Views, Section View, then it should show up lined up correctly.
Retrieving data ...