Hello My friend, I hope to finde my request
I deigned fan and want to generate the mold but have problem with that, please find my photos
I made the parting line and surface
Best Regard my friends
Sketch1 is not fully constrained. When I dimension it - it comes out to a perfect number. What happened to the dimension?
I did not take the time to layout the parting surface precisely - but this should give you some ideas.
And check your draft faces.
Your shut-off surfaces must be at least as big as your "Block size" in the tooling split.
Please explain more
I am beginner in mold designe
You need to extend those surfaces beyond the part/parts/mold you are making a cavity in. Using the 'Extend Surface' tool is probably the easiest. Though for more odd geometry, you might have to use the 'lofted surface' tool to smooth things out. And if you have multiple surfaces, use 'knit surface' to make them into 1 surface body before cutting the cavity out of the mold/molds.
Can you attach your *.sldprt file here?
Mr.J.Mather. thanks to take care
Yes ofcourse Will attach it. but my SW is SP2 2016
Is your version compatable with my.sldprt ?
please find attach
There are few issues with your model, in terms of core and cavity split
I am not sure whether you used the mold tools to create the parting line
If you modify your part to correct these issues, I think the combination of mold tools and surface tools should work to make the split
Retrieving data ...