This case was created in assembly file and mate with assembly origin. Improper Isometric View is coming. How to fix this? YouTube view is correct. Folder is attached.
Like Deepak said, Ideally you would go back and mate the enclosure to the original planes of the assembly. But here is a workaround for you:
Hold control and select the front face (1) and the top face (2), then when the pop up appears near your cursor select the normal to button (3)
Then hit the spacebar to open the view orientation toolbar, click the update views button (1) and then select the front view (2).
This will align all of your views according to that being your front face, fixing your isometric view.
Again, ideally you would set it up again correctly but here is a workaround. I have also attached the files in which I've applied this workaround.
Place your first part correct and then it should be good.
Highlight the face of the box and select "Normal To" then hit your space bar and over ride the front view as shown, then your ISO will show correctly..
Deepak is correct.
Right-click on your first part, select "float".
Mate the origin of this first part and the assy origin, check the coincident "align axes" box.
Thank you for your help
You'd better go thru the FAQ part 1 & 2 created by Glenn S.
Most of your questions can be found in there
Retrieving data ...