How to remove interference from the image ?
Extruded cut not working.
Sheet Metal + Break-corner =not working.
Sheet Metal + Unfold + Extruded cut + Fold = not working.
Please help .
Here is a slightly different approach inspired by John Stoltzfus. I deleted your Tab1 and added a Boss-Extrude (offset from surface). Like Tateos Tvapanyan instead of mirroring the hem (SW seems to have a problem with that) I recreated it. Was able to mirror the Boss-Extrude to the other side. I have attached a 2014 file.
You need to edit the hem or flange sketch and adjust to make it work, can you upload the part??
This is not a solution.
Download link to part :https://we.tl/uJ0cxdlGBt
Please upload part directly to the forum (as most of us wants to avoid external links; mainly due to IT restrictions)
Check #18 of Forum Posting on how to attach files while replying to a post.
Most times without a picture or a file it is impossible to know how you modeled the part, Deepak Gupta has the correct answer for you. There are many ways to design sheet metal components.......
I attached the part here.
Thank you ?
Here is what I did
Thank you very much !
Sheet Metal + Unfold + Extruded cut + Fold works fine for me but I'm with SW2016.
Of course, I didn't mirror the hem but build it separately on both sides.
That was the first thing I thought to try, but for some reason I wasn't getting the input box for the offset distance. (I'm running 2017 at the moment, that may have had something to do with that)
I did come up with another way, which someone may find useful in a similar situation.
I inserted an Unfold feature above Hem5, the fixed surface is the one with the red X on it, and the bend to unfold is Miterbend10, shown in blue. Hem5 and the mirror feature are unchanged. Cut-Extrude24 is a little triangular Through All to snip the corners of both hems. Then a Fold feature to put the top flange back in the right spot.
Not the most common use for the Unfold/Fold feature, but I sort of remember using it for a similar situation once before.
Retrieving data ...