Please help, how to change center line / center mark thickness in drawing?
I tried to change it with custom layer options and Options > Document Properties > Line Font, but it still not changed.
Thanks a lot.
I don't think there is an option to change the centermark line options
Yes you can change layers, but please read the original post, changing the thickness of the lines???
I just checked. While you can assign a Layer to centerlines in Document Properties, the drawing's centerlines only seem to pick up the color from the assigned Layer, not the line thickness. You can, however, change the centerline's thickness with the proper icon on the Line Format toolbar after it's placed.
I tried to change thickness from Layers, it's not work. For another method I can change centerline's thickness using Line Thickness, but it's not working for center mark. While I select centermark only, Line Thickness turn into grey and unusable.
You can change the thickness using the Line Format tool, If you use filters for center lines or center marks you can select them all with a box capture and then using line format tool change the thickness of all.
I had used that method, but it working for centerlines only, not centermarks,,
You're right. I saw that it worked for centerlines, so I assumed it worked for centermarks also. That might be worth contacting your VAR about to see if you can get it turned in as a bug or Enhancement Request.
Thanks Glenn, I'll try to send Enhancement Request, hope I got the answer.
Retrieving data ...