3 Replies Latest reply on Aug 16, 2009 10:15 PM by Emilio Graff

no solid body to pocess in cosmosXpress

D. chorosy Oct 9, 2008 9:02 AM

I have the problem with cosmosexpress as today it tells me there is no solid body to process.
I've already madde a study on the same part, the only difference is I suppressed/deleted some features.
The message appears right at the beginning so I can do nothing. Do you know what creates this problem?

Attached is the part I am struggling with.

no solid body to process.JPG 133.5 KB

no solid body to pocess in cosmosXpress

Ian Hogg Oct 9, 2008 9:50 AM (in response to D. chorosy)

I would submit the model to technical support at your VAR to verify if there is a bug or something wrong in the geometry. Looking at the picture it looks ok in the feature tree, but it's hard to tell without the geometry.

Ian
Like Show 0 Likes(0)

Actions
no solid body to pocess in cosmosXpress

Peter Biggert Oct 9, 2008 1:23 PM (in response to D. chorosy)

If CosmosXpress is like the other versions of Cosmos I have use then when you make changes to a part, the name of the solid body is changed. When this occurs you have to "Update Components" in Cosmos so that it reads the new name. If you don't do this then it tries to access the body using the old name and can not find it and you get the "No Solid Body to Process"
Like Show 0 Likes(0)

Actions
Re: no solid body to pocess in cosmosXpress

Emilio Graff Aug 16, 2009 10:15 PM (in response to D. chorosy)

Too little too late, probably. But see here:

https://forum.solidworks.com/message/113579#113579
Like Show 0 Likes(0)

Actions

Go to original post