How can I remove the numbers after the description in the cut list (the <1>)? It is not in the description on the properties manager.
When you select the Description column header (show the information for the column) does it have the information the same as the png screen shot that I showed you?
You currently have in Document Properties the check box for "Rename cut List" at the Part level deselected.
That option is checked in my part file, but not in the drawing file. So I checked the box in the drawing file, and reinserted the cut list but that didn't work.
Sorry you need is deselected in the Part. In SW 16 if you save your Part template out with that document Property selected it will stay that way (in 2015 you had to do it to every file).
Okay, so I deselected the Rename cut list option and now I have this.
So, your Library feature part obviously does not have a Description Property. Open the Weldment Lib Feat part, add a description to the part, or configuration if the part has multiple configurations. You will then have to back to the Part that has the Weldment you are using and edit it to a different Weldment type, accept and then change it back to include the included "Description".
It had a description. But never the less I changed it so it reads what I would like it to rather than referenceing the dimensions. I then changed my tube to angle iron, accecpted, and then changed it back to tube. However this did not fix the issue.
Go into the Tube, 2 x 2 file. Under the Configuration Manger, RBM the file name and select Properties.
Under Bill of Material Option select User Specified Name. Type in Tube, 2 x 2.
This should appear under Description in your Cut List.
This changed the discription in the BOM not the Cut list.
Does your Weldment Cut List look like this?
For the most part. The picture at the top of this post is what the cut list looks like, I need to remove the <1> after the descriptions. This part also goes into larger assemblies so I can change anything to do with the BOM.
You were right. I went into the png screen and selected cut list property, and then I had to change the drop down to description insted of length.
Retrieving data ...