I tried but it delete the whole instance instead of specific part. I attached the file and highlighted the part that i wanna delete.
Bilal,,, I deleted the surfaces on the end portion you had highlighted then did a boundary surface then knit so it would end up as one solid body.
See if this will do what you want.
Thank you very much Dennis Bacon. That is what i want.
You can simply use a extrude cut also instead of so face features
Another approach would be to create 2 sweep features. Then pattern the main sweep feature 12 times and the end sweep feature 11 times.
Or split the original sweep into 2 bodies. Then pattern the main body 12 times and the end body 11 times.
Both of these "additive" design approaches will help when you add a BOM to your drawing.
Agree but it depends on if the coil is being made from single tube OR multiple pieces.
I agree, so if he is doing this as a single tube, then he should be patterning the current path in the original path sketch. Then a single extrude does it!
Hi bill how can i split the orginal sweep into 2 bodies?
First draw a sketch line, then use the Split command. Please see attached part.
Retrieving data ...