-
Re: how can you form am octagonal cylinder one side is 14'' and the other side is 9'' the distance between them is 800'' and the thickness s 0.16'' or 4mm. am trying to loft it but it not forming.
Wycliffe,
Your two sketches have two open contours in each so you will need to use the selection manager to pick your contours for lofting or close the contours within the sketch. You can pick the inner or outer contour of each sketch & make a thin feature to add the thickness.
Cheers
-
Re: how can you form am octagonal cylinder one side is 14'' and the other side is 9'' the distance between them is 800'' and the thickness s 0.16'' or 4mm. am trying to loft it but it not forming.
Hi Kevin av got two bodies that I would like to mate. A cylinder and a solid square. The cylinder is cut at an angle on the top. Both are are created by the top plane. How can u mate the square body to mate on top of the cylinder at that angle?
-
