Section view is not sectioning all parts.
can anyone give a solution for this please.
You don't show if the section line goes thru the part on the other side so you may want to select "Partial Section"
Also if you have items in that view that are hidden in your drawing view that are larger than your line this can happen.
Another thing to look for is if you have a surface model or part that is all surfaces that will sometime cause what you are showing
Thanks for that tips
In addition to Jim's advice, also check if section in creating any zero geometry as that would also fail the section.
Thanks for that tips.............
I notice the color of the section line and the section view are that golden color (not black) that signifies an error.
Try deleting the section line and redoing it.
I have had multiple problems with the section view not working properly in solidworks especially in the last 2 years. It wouldn't section properly and give a failed message occasionally and show the golden color as shown above. Also I could align the cutting line parallel to a face and it still would not align the section cut with that face. Another issue is trying to align a section view with the sheet. It is so complicated to get the view to align to be right side up elevation view, which most of the time it can't be done. Centerlines and centermarks also will not locate themselves in the proper place sometimes in a section view.
The point being is when it comes to making drawings in solidworks it is the most unreliable program so don't beat yourself up trying to find a fix. In my experience the best solution in most cases is to delete the view you are having trouble with and start over, which may cause hours of lost time. I have seen in a huge amount of cases that section views, break view, crop views and detail views will create some sort of trouble. I currently am beating myself today trying to get a section view to work correctly and just dealt with break views not working right. I don't believe the programmers actually make any drawings or these issues would never happen.
I am assuming you are using an earlier version of 2015 or late 2014 - Best way to do section views in those versions was to draw a sketch line then select that line and then the cross section icon....
Retrieving data ...