I am try to mirror a assembly with its appearance. But its not work . Hoe to solve this.
i think you must set appearance in each file not in assembly
Thanks for the help. I tried with set appearance to part level. But it is not work.
Please open the part and right click in top level of part and then select your favorit appearence and save it . I check it . It is okey
I followed the way. But result is same. Below i have attached the steps which i followed.
01. Removed old appearance.
02. Select the part leave to apply appearance.
03. Select the color.
04.Follow those steps for each part.
05. Then mirror the assembly.
Please guide me. My steps are correct or the path is another?
i created 2 parts , part 1 and part 2 and then assembled them
then I mirrored them in assembled file
I've opened part 1 and assigned appearance to it. you must refer to the top level of part 1 and set your favorite appearance
and also for part 2 do the same thing
so if we back to assembled file we could see the result
i hope your problem is fixed
thanks - nasiri
The method given by you is also work for me with other mirror cases.
I think the problem is with this special assembly. It is contain with some imported parts.
It occurs what ever the mirror operation i done with those parts. Could you have any idea about this.
if it possible please send your parts which you want mirror them.
The case is occur inside a very large assembly. It is difficult to send.
I checked the components can mirror in a new assembly with appearances.
I believe the case with the assembly.
Thank for your great help.
Retrieving data ...