Now we can add property name one by one for each cut-list item.
Now it is possible to use Property Tab Builder for this,
it is possible to assign properties to weldment feature
But unfortunately both these methods don`t give you ability to assign Mass of each member and CutListItemName properties.
Yes,of course,
| this is test model |
|---|
 |
This is default system properties of cut-list items for this model
|
This is additional properties I need
|
This is weldment feature properties. According to help it contains only common properties, not specific to each cut-list property.
It is very strange but I don`t need mass of whole weldment as some property of cut-list item I need mass of each item instead.
It is not big problem but why don`t give ability to populate Mass and CutListItemName of each cut-list item.
Other model with profiles or sheet metall have another set of default system properties,
at that sheet metall cut-list has Mass property already
I had go at this and was able to get separate masses for different items using weight as property name and mass as value.
Not sure if this is what your getting at?
I`m here about weldment feature, select it,RMB>Properties
If you mean adding custom properties to the all cut list item then you can either add them to the weldment OR use a macro to populate those properties.
Problem with mass is solved by SWX2018 sp3:
SPR_1038191:Parts, Feature - cut Ust: The Mass In weldment cut llst, after adding Mass property to all weldment cuts, is displayed as a mass of whole part in each weldment part.
Can you be more specific ?