Do I have an option to hide all backgrounds in my section view and to view only the section lines?
Also can I set the property so that I can get a particular hatching for a specific component in my drawing when I take a section view?
If I undrstand you correctly, that you only want to see the profile of the area being cut, then yes. Check the 'Display only cut faces' box in the section properties.
I DONT HAVE THAT OPTION I THINK.
use the slice section.
THANKS FOR THAT...........
Is your section going through a solid body or a surface body?
Do anyone know how can I set the property so that I can get a particular hatching for a specific component in my drawing when I take a section view?
If you have your materials set up with the correct hatching, then apply the correct materials to each part, then when you do the section ensure the 'Material crosshatch' check box is checked.
how these settings are done?
At part level, at the top of the feature tree, right click on material > Edit Material > select the material you're after > go to the cross hatch tab > ensure this is set the way you need > click apply.
Do this for all the parts, then the sections will show the individual crosshatch for each part.
THANKS A LOT
No problems. I hope it worked for you.
Retrieving data ...