Can anyone help me to make Sweep cut on 3d surface uniformly.
I have attached a similar part to make sweep cut.
Try using this edge from the (existing) hole as your path on the cut sweep3 instead. See if this gets you what you want.
what I noticed is that if I use edge of existing hole, at the bottom it become non uniform.
i'm not sure if this is what you want but check attached part.
thanks for that..........
I noticed that you have used split line to do the boundary cut. cant we project the curve on to the surface and do a boundary cut?
In this case i have tried to do this with projected curve and it didn't work.
thanks a lot....
Retrieving data ...