-
-
-
Re: Solidworks will not open
No problems for me.
Are you running a network license? Is it a student edition? What part of the world are you in?
-
Re: Solidworks will not open
US 2017 SP3 should be network.
What is weird is I show all the servers I'm connected to as up. At least its not just me and the rest of us are also down. So think its on our end somewhere.
-
Re: Solidworks will not open
WEll, when I mean are the servers up, I really mean is the license server running on the server?
Steve C
-
-
-
-
Re: Solidworks will not open
Hi David,
Since this appears to be impacting all your computers when they were previously working fine the issue likely is with your server itself. The service on the server may not be running or the server's firewall had been enabled where it was previously on a disabled state.
Check and see if the server service is running (open the SolidNetWork License Manager on the server and press 'Start' on the 'Server Administration' tab) and if it is running try dropping the firewall and see if your client machines are then able to connect l, get a license, and open SOLIDWORKS. If dropping the firewall fixes it you will need to make port allowances for the license service before putting it back up (TCP and UDP allowance for 25734-25735 for both inbound and outbound traffic).
-
Re: Solidworks will not open
Yep we had a power outage over the week end and that server did not come back up after power was restored.
-
