Right clicking in the feature tree and configuration tree only gives me a small menu with no access to anything that used to be there. Attempts to customize said menu only gives me the tools already show. How do i get back usefull tools like add configuration, create new folder, etc?
I read one post that was solved by going to Tools/Customize.../Customization and selecting "Show All" under Menu Customization. This did not work for me. Neither did Reset to Defaults.
Are you in the process of editing a sketch? This is what it looks like to me.
If this IS the case, then exit the sketch editor and your right click menu should re-appear.
I'm getting the truncated menu regardless. It happens when I pull up different parts as well. Even in assemblies.
Hi John,
is your measure dialog open? If so, this is a bug that is fixed in SOLIDWORKS 2017 SP02. See this thread for details:
I hope this helps,
Jim
I don't have any dialog boxes open either. The problem continues on a newly opened part, with no boxes or sketches open. It persists on newly made parts as well as old parts.
This was my problem. Using Solidworks 2017 SP00.
Could also be your Mass Properties dialog open but minimized. Also, click on your PropertyManager tab, make sure you don't have a feature engaged. Hitting ESC a few times always seems to cure the problem for me!
I closed SolidWorks and restarted my computer multiple time and the problem persisted. I assume any dialog box would have been closed doing that. All that being said, I spammed esc a couple times and now it works... weird
Thanks!
Could also be your Mass Properties dialog open but minimized. Also, click on your PropertyManager tab, make sure you don't have a feature engaged. Hitting ESC a few times always seems to cure the problem for me!