AnsweredAssumed Answered

AddRelation not working

Question asked by Joshua Linsky on Feb 8, 2016
Latest reply on Feb 8, 2016 by Artem Taturevych

Hello,

I've tried many different ways to get the AddRelation to actually add a relation, but none of them seem to work. Has anyone been able to actually use this method? I've tried looking online but I can't find very much about this. This is my code:

 

Dim swApp As SldWorks.SldWorks

Dim swModel As SldWorks.ModelDoc2

Dim modelType As Long

Dim swSkMgr As SldWorks.SketchManager

Dim swSelMgr As SldWorks.SelectionMgr

Dim swSkRelMgr As SldWorks.SketchRelationManager

Dim swSkRel As SldWorks.SketchRelation

Dim swSketch As Sketch

Dim sketchSegs() As SldWorks.SketchLine

Type coordinates

    x As Double

    y As Double

    z As Double

End Type

 

Sub main()

    Set swApp = Application.SldWorks

    Set swModel = swApp.NewDocument("C:\ProgramData\SolidWorks\SolidWorks 2014\templates\Part.prtdot", 0, 0, 0)

    Set swSkMgr = swModel.SketchManager

    Set swSelMgr = swModel.SelectionManager

    swSkMgr.Insert3DSketch True

    Set swSketch = swSkMgr.ActiveSketch

'This line prints "True" every time indicating that my sketch IS active

    Debug.Print (swSketch.Is3D)

    Set swSkRelMgr = swSketch.RelationManager

    'swModel.SetAddToDB (True)

    'swModel.SetDisplayWhenAdded (False)

    'Call makeModel

    Call makeModelWithRelations

    'swModel.SetAddToDB (False)

    'swModel.SetDisplayWhenAdded (True)

End Sub

 

 

Sub makeModelWithRelations()

    Dim boolstatus As Boolean

    Dim startPoint As coordinates

    Dim endPoint As coordinates

    Dim vEntities As Variant

    Dim objArray(2) As Object

    Dim segment(1) As SketchSegment

    Dim segment2(1) As SketchLine

    Dim heading As Double

    Dim relations As Integer

    For currentInstruction = 0 To UBound(GetFile.bendProg.rotation)

        If currentInstruction = 0 Then

            startPoint = setPoint(0, 0, 0)

            endPoint = setPoint(0, bendProg.straight(0), 0)

            createAline startPoint, endPoint

            Set objArray(0) = sketchSegs(currentInstruction)

            Set segment(0) = objArray(0)

            Set segment2(0) = objArray(0)

            Set swSkRel = swSkRelMgr.AddRelation(segment, swConstraintType_e.swConstraintType_FIXED)

            Set swSkRel = swSkRelMgr.AddRelation(segment2, swConstraintType_e.swConstraintType_FIXED)

            Set swSkRel = swSkRelMgr.AddRelation(objArray, swConstraintType_e.swConstraintType_FIXED)

          'If there is a relation it will show up in between the "df" and "SG", but every time this is run all that is printed is "dfSG"

            Debug.Print ("df" & swSkRelMgr.GetRelations(swAll) & "SG")

            relations = swSkRelMgr.IGetAllowedRelations(1, segment2(0), 4)

          'This always prints out 17, indicating that I CAN make this line fixed

            Debug.Print (relations)

        Else

 

 

        End If

       

    Next currentInstruction

End Sub

 

Sub createAline(ByRef startPt As coordinates, endPt As coordinates)

    Dim boolstatus As SldWorks.SketchLine

    Dim bool As Boolean

    Dim dummy1 As coordinates

    Dim dummy2 As coordinates

    dummy1 = setPoint(startPt.x, startPt.y, startPt.z)

    dummy2 = setPoint(endPt.x, endPt.y, endPt.z)

    dummy1 = convertToInch(dummy1)

    dummy2 = convertToInch(dummy2)

    Set boolstatus = swSkMgr.CreateLine(dummy1.x, dummy1.y, dummy1.z, dummy2.x, dummy2.y, dummy2.z)

    ReDim Preserve sketchSegs(currentInstruction + 1)

    Set sketchSegs(currentInstruction) = boolstatus

End Sub

 

Function setPoint(ByVal X2 As Double, ByVal Y2 As Double, ByVal z2 As Double) As coordinates

    Dim toSet As coordinates

    toSet.x = X2

    toSet.y = Y2

    toSet.z = z2

    setPoint = toSet

End Function

 

Function convertToInch(toConv As coordinates) As coordinates

    toConv.x = toConv.x * metersToInch

    toConv.y = toConv.y * metersToInch

    toConv.z = toConv.z * metersToInch

    convertToInch = toConv

End Function

 

The documentation for AddRelation is as follows:

 

Function AddRelation( _

   ByVal Entities As System.Object, _

   ByVal RelationType As System.Integer _

) As SketchRelation

 

Visual Basic (Usage) 

Dim instance As ISketchRelationManager

Dim Entities As System.Object

Dim RelationType As System.Integer

Dim value As SketchRelation

 

value = instance.AddRelation(Entities, RelationType)

 

I've tried making "Entities" an array of: Objects, SketchLine, and SketchSegment and none of these seem to be what "entities" should be.

 

Also, if I just try:

Set swSkRel = swSkRelMgr.AddRelation(objArray(0), swConstraintType_e.swConstraintType_FIXED), which only references the one line I've made, solidworks just crashes

 

Can anyone tell me what I'm doing wrong? I'm about at my wits end on this.

Outcomes