11 Replies Latest reply on Aug 15, 2016 12:15 PM by Chris Saller

HOW TO REMOVE UNDERSCORE AFTER SCALE IN SECTION VIEW LABEL

Christopher Estelow Nov 5, 2015 9:47 AM

Whenever I create a section view the label for the view has an underscore after scale and before the scale like shown below in the picture. How can I get rid of this? I forget to remove it sometimes and it drives me nuts.

I thought maybe that it was accidentally added to the view label in options but as you can see in the image below there is nothing there.

I am running SW14 and any help would be greatly appreciated!!!

Chris

Re: HOW TO REMOVE UNDERSCORE AFTER SCALE IN SECTION VIEW LABEL

Tom dunn Nov 5, 2015 10:30 AM (in response to Christopher Estelow)

Chris, you don't have underline selected under the font do you? Not sure if that affects the section line or not.
Like Show 1 Likes(1)

Actions
- Re: HOW TO REMOVE UNDERSCORE AFTER SCALE IN SECTION VIEW LABEL
  
  Tom dunn Nov 5, 2015 10:42 AM (in response to Tom dunn)
  
  oops not where I showed you but below that, but still under font for each of the parts of the section label, select the font where indicated and then un-check the underline in the bottom right corner.
  
  Like Show 1 Likes(1)
  
  Actions
  - Re: HOW TO REMOVE UNDERSCORE AFTER SCALE IN SECTION VIEW LABEL
    
    Christopher Estelow Nov 5, 2015 11:57 AM (in response to Tom dunn)
    
    Tom,
    Both of the ones you have highlighted in red do have underline checked. The problem is that I want them to be underlined. I don't want the little line after scale as shown below by the red arrow? I checked the fonts for scale and delimiter and the underline is not checked.
    
    Chris
    
    Like Show 1 Likes(1)
    
    Actions
    - Re: HOW TO REMOVE UNDERSCORE AFTER SCALE IN SECTION VIEW LABEL
      
      Deepak Gupta Nov 5, 2015 12:29 PM (in response to Christopher Estelow)
      
      can you upload one sample part and drawing showing the behavior? That way we can check the settings and verify our machines.
      
      Like Show 1 Likes(1)
      
      Actions
      - Re: HOW TO REMOVE UNDERSCORE AFTER SCALE IN SECTION VIEW LABEL
        
        Christopher Estelow Nov 5, 2015 12:51 PM (in response to Deepak Gupta)
        
        Here ya go Deepak!!
        
        Part2.SLDDRW.zip 89.8 KB
        
        Part2.SLDPRT.zip 36.6 KB
        
        Like Show 1 Likes(1)
        
        Actions
        
        Re: HOW TO REMOVE UNDERSCORE AFTER SCALE IN SECTION VIEW LABEL
        
        Deepak Gupta Nov 5, 2015 1:31 PM (in response to Christopher Estelow)
        
        Seems like a bug as I can replicate the same on my machine also. Please report to your VAR
        
        Like Show 1 Likes(1)
        
        Actions
    - Re: HOW TO REMOVE UNDERSCORE AFTER SCALE IN SECTION VIEW LABEL
      
      Deepak Gupta Nov 5, 2015 12:42 PM (in response to Christopher Estelow)
      
      Also check this: SPR #: 757313 Changing the section view label font adds an underscore to the scale note.
      
      Please report to your VAR.
      
      Like Show 1 Likes(1)
      
      Actions
Re: HOW TO REMOVE UNDERSCORE AFTER SCALE IN SECTION VIEW LABEL

Chris Saller Nov 5, 2015 1:50 PM (in response to Christopher Estelow)

I have had this issue since 2014. I submitted it early this year. My VAR didn't seem to think it was a problem, but they don't make drawings for a living. ;-)
Like Show 1 Likes(1)

Actions
- Re: HOW TO REMOVE UNDERSCORE AFTER SCALE IN SECTION VIEW LABEL
  
  Vincent Bong Aug 15, 2016 7:38 AM (in response to Chris Saller)
  
  So did anything come out of this in the end? I'm having the same issue as well.
  
  Like Show 1 Likes(1)
  
  Actions
- Re: HOW TO REMOVE UNDERSCORE AFTER SCALE IN SECTION VIEW LABEL
  
  Matthew Lorono Aug 15, 2016 11:56 AM (in response to Chris Saller)
  
  Chris, was your report attached to a bug by the VAR?
  
  Like Show 0 Likes(0)
  
  Actions
  - Re: HOW TO REMOVE UNDERSCORE AFTER SCALE IN SECTION VIEW LABEL
    
    Chris Saller Aug 15, 2016 12:15 PM (in response to Matthew Lorono)
    
    Hi Matt.
    I will have to look back, I don't remember now.
    I do remember I did tell them on the phone earlier this year.
    The frustrating part with them, I show them problems, if they don't see it on their end, it's not a problem.
    
    Like Show 0 Likes(0)
    
    Actions

Go to original post