AnsweredAssumed Answered

Custom Material - Glass Filled Plastic

Question asked by Kris Jones on Jun 2, 2015
Latest reply on Jun 6, 2015 by Radoslaw Szmid

Hi all,

I am trying to do a simulation on a plastic part that is made from the following material

Domamid - A1-005-V50-B

It is 50% Glass Fiber Filled - See data at bottom of question

 

Can someone help me create a material that resembles this accurately in SolidWorks please.

Is all the information I need there in the data sheet? Are some of the headings just a different title for the same value?

 

I need the following information for my simulation - Can anyone else get this info for this material?

Elastic Modulus(N/mm^2)

Poisson's Ratio

Shear Modulus (N/mm^2)

Mass Density (kg/m^3)

Tensile Strength (N/mm^2)

Compressive Strength (N/mm^2)

Yield Strength (N/mm^2)

 

With this information would the simulation accurately simulate glass filled plastic?

Any help would be much appreciated

Thanks in advance

 

Rheological propertiesdry / condUnitTest Standard
ISO Data
Melt volume-flow rate, MVR22 / *cm³/10minISO 1133
Temperature275 / *°CISO 1133
Load5 / *kgISO 1133
Molding shrinkage, parallel0.4 / *%ISO 294-4, 2577
Molding shrinkage, normal1.1 / *%ISO 294-4, 2577

 

Mechanical propertiesdry / condUnitTest Standard
ISO Data
Tensile Modulus17000 / 11100MPaISO 527-1/-2
Yield stress215 / 145MPaISO 527-1/-2
Stress at break220 / 145MPaISO 527-1/-2
Strain at break2.5 / 4.4%ISO 527-1/-2
Charpy impact strength (+23°C)100 / 100kJ/m²ISO 179/1eU
Charpy notched impact strength (+23°C)14 / 25kJ/m²ISO 179/1eA
Flexural modulus (23°C)13300 / 8250MPaISO 178

 

 

Thermal propertiesdry / condUnitTest Standard
ISO Data
Melting temperature (10°C/min)221 / *°CISO 11357-1/-3

 

 

Other propertiesdry / condUnitTest Standard
ISO Data
Humidity absorption1.7 / *%Sim. to ISO 62
Density1560 / -kg/m³ISO 1183

Outcomes