-
Re: Automation of Explode Line Sketches.
J. Mather Feb 16, 2014 9:29 AM (in response to Steven Smith)-
Re: Automation of Explode Line Sketches.
Steven Smith Feb 16, 2014 9:48 AM (in response to J. Mather)JD,
Yes, this is the current method that we use. The problem being that when you move 10+ fasteners (for example PEM clinch nuts) you have to do this manually for every Clinch nut.
It would be nice if you were able to select all the fasteners and the system would automatically reference the concentricity of the hole and apply the sketch lines automatically upon moving the nuts using the explode command.
Deepak, I'll make up a ER and update this post with the link so people can request it also.
-
-
Re: Automation of Explode Line Sketches.
Deepak Gupta Feb 16, 2014 9:38 AM (in response to Steven Smith)Can be a cool enhancement. Sorry no automatic way at the moment so please submit an enhancement.
-
Re: Automation of Explode Line Sketches.
Steven Smith Feb 16, 2014 9:57 AM (in response to Steven Smith)I have created a service request for the following:
ER:# 1-5246116616
The current process is too slow and becomes a mundane chore. The problem arises that when you move 10+ fasteners (for example PEM clinch nuts) you have to manually add explode line sketches individually for every Clinch nut.
It would be nice if you were able to select all the fasteners and the system would automatically reference the concentrically of the hole and apply the sketch lines automatically upon moving the nuts using the explode command. -
Re: Automation of Explode Line Sketches.
Alin Vargatu Feb 16, 2014 10:48 AM (in response to Steven Smith)Vote on this ER:
SPR 564296: Explode steps should automatically generate the explode lines
-
Re: Automation of Explode Line Sketches.
Steven Smith Feb 16, 2014 3:20 PM (in response to Alin Vargatu)It's done Alin.
Thanks for highlighting this.
-