I hadn't noticed that before because I have the material set within the part template. If the material is changed, I normally change it in the FM.
A quick test with the Property Tab Builder shows that if the material is set first, the "Changes have been made ..." message does not appear. So a workaround might be to move the Material field to the top of the PTB ... or set up material specific part templates.
That is interesting. I got in the habit of having the material callout in the
tab builder a couple of years ago before the apply button became an issue.
Done this way because of it filling out in the title block and was handy because
everything was already in the tab builder filling out everything else.
I think what you suggested in putting the material callout at the top is my best
option for now. I will look into that in the morning when I get to work.
Thanks for the heads up!!!
I also have the material in the PTB, but very seldom use it. When I have used it, it must have been the first, or one and only change, so the message never appeared.
I just tried your suggestion in changing the material first and I did
not get the message. I am going to move the material selection
to the top.
Interesting how you have it in the TB but rarely use it there.
Did you layout the TB?