• Network Port setup for PCB Services

    Hi,   Which ports beside 9780 need to be open in the network for the Communication to work without hickups for PCB Services?
    Markus Olsson
    last modified by Markus Olsson
  • Altium - Solidworks PCB Connector

    Altium has released AD19.  It appears to no longer support locally hosted Vaults.    This is a problem for the PCB Connector, which uses Vaults to transfer information back and forth.   Does thi...
    Douglas George
    last modified by Douglas George
  • Word Add-ins Solidworks PDM Integration not loaded.

    Installed Solidworks 2019 SPD PDM Client and the Word add-in has issues: Message from "Com Add-ins" property sheet: "Load behavior: Not Loaded.  A runtime error occurred during the loading of the COM A...
    paul stewart
    last modified by paul stewart
  • Is there a way to make nets flat instead of rounded on the ends?

    Hi, I was wondering if it's possible to make the ends of nets flat instead of rounded. I have hundreds of LEDs that I need to route with 100mil nets and when I connect it to the LEDs the rounded end overlaps other pa...
  • Changes in STEP file generation in SP2018.4

    Hi,   installing PCB SP2018.4 changes the STEP file generation. Colours in the model are different - board is grey, components has different colour as well. In SP2018.3 works all fine.   Is there any chan...
    Vladimir Hubik
    last modified by Vladimir Hubik
  • Does anybody know what is this error in opening SolidWorks PCB?

    It came when opening SolidWorks PCB ?SOLIDWORKS PCB@
    K. vigneshkumar
    last modified by K. vigneshkumar
  • Very High CPU Usage

    Hello,   When using Solidworks PCB I have noticed very large spikes in its CPU usage. Sometimes up to 50%. The process is named WMI Provider Host, which I traced back to Solidworks PCB. I've tried installin...
    Electrical Engineer
    last modified by Electrical Engineer
  • solidworks 2019 fige

    Bonjour, J'ai installé récemment Solidworks 2019 avec les différents SP du moment, avec la mise à jour des pilotes graphiques comme conseillé. Ce sur un poste en Windows 10 1809. Il...
    Stephane Pohu
    last modified by Stephane Pohu
  • SW PCB integration to the PDM

    It has been a while I asked here for the integration of SW PCB in to the PDM. Our company running SW products and PDM integration of all softwares would be great. I dont see the plans in SPs for early 2019. When we c...
    Vladimir Hubik
    last modified by Vladimir Hubik
  • edit library in excel

    How can I create a lot of similar components in a spreadsheet and import them into an integrated library file?   For example, in Pads, I can create a hundred 1/4W through-hole resistors in a spreadsheet by copyi...
    Robin Vice
    last modified by Robin Vice
  • Altium PCB Connector - Large components only

    We use the PCB Connector between Altium and SW. Overall it works well. Question- Is there a way to have Altium only push selected components? (or eliminate groups of other components) At the early stage of a projec...
    Keith Carter
    last modified by Keith Carter
  • How to add Layer Stackup table to PCB

    Hi, I was not able to find any information on how to add layer stackup table to PCB. Many manufacturers require to have the specifications inside gerber files, layer stackup is one of them. Thank you
    Sigitas Vilkas
    last modified by Sigitas Vilkas
  • Missing: Routing setup report

    Hello I'm trying to autoroute in one single layer but when accessing to Autoroute setup, a Situs Routing strategy windows pops up but doesn't contain the part of the Routing Setup report which allows me to choose the...
    XX XX
    last modified by XX XX
  • Como doblar?

    Buenas tardes. Sabéis si existe la opción de doblar? Es una cinta transportadora y la lona la tengo en horizontal, con extrusiones, y quiero juntar los extremos haciendo un radio determinado. Alguien ...
    Sergio Martos Romera
    last modified by Sergio Martos Romera
  • Can Someone explain to me how to create a board that uses 1 part or the another?

    Good Morning, Afternoon, or Evening,           I am currently trying to create a simple board that has the option to use two different parts. One of the parts is quite a bit la...
    Lee Havens
    last modified by Lee Havens
  • Helical Traces, is it possible in SW PCB?

    I am working on a layout for a flex circuit. The circuit will be used as an interconnect. It is somewhat like a "slinky", but it will lay flat. The problem is, I am not sure how to route traces that are helical in sha...
    Jerry Timm
    last modified by Jerry Timm
  • Installation of SW PCB Services, problems

    The installation process of SW PCB Services causes a problem that occurs after the transition to Firbird 3.0. Previously, there was no great need for the work of the SW PCB, so it did not attach much importance that ...
    Andrej Zapoljskih
    last modified by Andrej Zapoljskih
  • Altium - PCB Connector - Embedded Board Array

    Hi,   Is Embedded board Array supported through the SOLIDWORKS PCB Connector with Altium Designer 19.0.14 ? 3D models don't get transferred as they do if it's  single board.   BR Markus
    Markus Olsson
    created by Markus Olsson
  • SW PCB: Schematic Sheet Symbol to Lib Part

    To save some time (helpful when working with micro controllers with hundreds of pins), does anyone know how to open a schematic sheet and use a symbol (with pins and descriptions etc) and create a schematic library co...
    Sven Schroeter
    last modified by Sven Schroeter
  • 英語版に切り替え

    システムオプション ー 一般 で「英語版に切り替え」にチェックを入れても システムオプションを開くとチェックが外れています。 どのような原因があるのでしょうか
    Shinji Maezawa
    last modified by Shinji Maezawa