• How to make a model float in water

    I am currently doing a project in which I need to create an animation of a bath toy floating (and possibly swimming!). I am unsure how I should go about doing this. I've worked out how to make the fins, that will prop...
    Alex Baker
    last modified by Alex Baker
  • falling test is not real

    hi guys i simulated a simple falling of a ball on a plate. i have expected that  after balls contact, it would be jump up and down alternatively. but unfortunately it fall and then stop. the attached file is my...
    Ehsan Hoseinkhani
    last modified by Ehsan Hoseinkhani
  • Trying to simulate and capture the vibrational amplitude/ acceleration (in three direction X, Y & Z)

    Hi, I am trying to simulate/capture the vibrational amplitude/ acceleration (in three direction X, Y & Z) in an assembly consists with 3 Ball bearings, 3 bearing housings (will be fixed on a plane), 1 Shaft, &...
    Md Sobug Mia
    created by Md Sobug Mia
  • Chain array motion?

    Can you make a chain array move in a motion study around a belt? Picture a cleated conveyor belt? The motion study says you can use "Anything but free", however "Free" is the only one that appears to move the entire a...
    Matt Juric
    last modified by Matt Juric
  • Linear motor problem.

    Attached is an assembly with two parts. I've been messing with this in a larger assembly for the last couple days. For some reason the linear motor is not working for me. It works in the animation but not in the motio...
    Matt Juric
    last modified by Matt Juric
  • I want to make an animation of collapsing the assembly using fading out the parts. How can I do that ?

    I want to make an animation of collapsing the assembly using fading out the parts. i want step by step part appears and get the position and assembled to their path.
    Aashish Jain
    last modified by Aashish Jain
  • Animation Wizard - Explode or collapse incorrect part spacing and duration results

    Topic: Motion Studies, Animation Wizard, Explode or Collapse Assistance is welcomed! Description of undesired results:   After an exploded view sequence is generated in a SW assembly model a new motion study is...
    Steve Kunz
    last modified by Steve Kunz
  • Determining torque required by a motor using motion analysis?

    Can I run my set-up by anyone? It would be greatly appreciated as I've never done a motion analysis before. What I've done is made a rough mock-up of an assembly as one part in order to do a motion analysis because wh...
    Scott Jevne
    last modified by Scott Jevne
  • Multiple Rotary Motors Failing

    I'm trying to run a motion analysis to simulate a spacecraft rotating without being in space. It's a very basic model and I'm just using it to show a physical description and the motion that is intended. I'm trying to...
    Ryan Walker
    last modified by Ryan Walker
  • Motion Study - Red Bar? What is Wrong?

    Hello,   I have a motion study that looks like it is working fine. However, I am getting the red bar across the top. Does SW give clues to what the problem is?   I am using SW 2011.   Thanks,   ...
    Brent Theobald
    last modified by Brent Theobald
  • Visual glitches during animation

    Hi,   I am trying to animate a material folding and stacking process. Although there isn't an issue with the actual folding or moving process (motors), the part blinks in and out of configuration, turning itself...
    Arthur Baranovskiy
    last modified by Arthur Baranovskiy
  • Using Motion Analysis with Stress versus Static Stress

    I performed a static stress on an entire assembly with a load in the simulation.  I then added a motion analysis and added an equivalent load to the same areas with motion, but the Von Mises stresses I got were m...
    Ryan Walker
    created by Ryan Walker
  • recording a video from camera

    Hi, I am doing a walkthrough video using a camera at the motion study, but when I am saving the video, it is capturing only the screen and not the camera view port. anybody konws how to capture only the camera view ?...
    Moh AA
    last modified by Moh AA
  • Linear motor force

    Hello, i attach a screenshot of a mechanism which is activated by 2 linear motors (hydraulic cylinders). When i run the motion analysis with both the cylinders as motors, i get totally different force plots for each...
    Theodoros Dragonas
    last modified by Theodoros Dragonas
  • Motion eCourse is now available...

    Hello All,   The new SOLIDWORKS Motion eCourse for SOLIDWORKS 2018 is now live!   There are still 3 weeks remaining in the Summer of eLearning promotion (ends September 21st) so please take advantage of t...
    Joy Garon
    created by Joy Garon
  • Help needed with this linear motor study

    Hi all, I've been wrecking my mind trying to do this motion study.   What I'm trying to achieve with it is that the part "RectangleV7.3 - Stiff-1 - backup" should be linearly oscillating by 10mm, which would ca...
    Colin Ng
    created by Colin Ng
  • How can I calculate the impact of moving lever at constant velocity motion with mass at rest with spring and damper in point of contact?

    I have a lever and it is rotating at 10 deg / sec. When the lever is at -20 degree from horizontal, a mass(at rest) of 10 kg is attached on rotating lever. There is a spring of known spring constant and frictional dam...
    Ashesh Shrestha
    created by Ashesh Shrestha
  • Question about applying two torquing motors to move the same part on two different spin axes.

    I'm animating the motion of a gyroscope and I am having some difficulty. Lets say that the Gyro rotates about the Y-Z plane and sits within a housing that rotates about the X spin axes. Please see the pictures bellow ...
    Dustin Braun
    last modified by Dustin Braun
  • View Jumps

    At the end of a view orientation change, the view jumps back out after zooming in. Does anyone know how to control this? I've included the .avi for your viewing pleasure. Thanks for the help!
    John Vogt
    last modified by John Vogt
  • My object move automatically but i don't want

    I used solid motion for simulating the motion of robot hand. But I have some problem with it. When i move the yellow part moving 180 degree, and the blue part and violet part also move. I have tried to add another mot...
    Tien Dang
    last modified by Tien Dang