• eDV 2015 annoyance: Components list extremely slow for assemblies

    Hi,   we usually use the components list a lot to filter for specific sub assemblies or parts to either only show these parts or hide them (which is a very efficient way for bigger assemblies). In eDV 2014 this ...
    Gerald Kratzert
    last modified by Gerald Kratzert
  • eDrawings 2016 - first impressions

    As soon as I saw E-drawings 2016 available for download yesterday, I installed it to see if the improvements I was waiting for were implemented.   At first the installer would not complete, saying I already had ...
    Kim Aleksijuk
    last modified by Kim Aleksijuk
  • 2015 and 2016 on the same machine?

    Hi All,   Does anyone know if it is possible to install eDrawings 2015 and 2016 on the same machine?   Not that I want to run both but I'm reluctant to uninstall 2015 (awful as it is) until I know if 2016 ...
    Barry Halford
    last modified by Barry Halford
  • eDV 2015 bug: click through bug

    Hi,   these bug is difficult to reproduce. When I work with an assembly at some point it is not possible to select a part, instead a part behind or below this part will be selected instead. E.g. see the followin...
    Gerald Kratzert
    last modified by Gerald Kratzert
  • eDrawings for Android 5 (Lollipop) now available!

    Hi everyone!   I just wanted to quickly announce that eDrawings is now available for Android 5 (Lollipop)! You can now take advantage of the viewing and collaboration power of eDrawings on the newest version of ...
    Blake Reeves
    last modified by Blake Reeves
  • Re: How can I add an edrawings file to a website?

    If it was me I would use a 3D PDF file. No special reader is required.
    Bernie Daraz
    last modified by Bernie Daraz
  • Augmented Reality Now Available on eDrawings for Android

    Hi Everyone!   I'm excited to officially announce that the highly requested Augmented Reality (AR) experience (previously only available for iOS) is now available in the latest update to eDrawings® Pro for ...
    Blake Reeves
    last modified by Blake Reeves
  • HEY SW! FIX eDRAWINGS!!!

    eDrawings 2015 is a complete joke!! After starting the program 3 times you get the registration dialog box. Except that while you are completing the form the box closes. Then start the program three more times, and re...
    Erich Wester
    last modified by Erich Wester
  • E-drawings VIEWER - Do not show the file preview

    Hi all,   in our office we have Solidworks with E-drawings professional installed. All is ok, the preview for the files are displayed properly for both the applications.   My boss need to print, control, ...
    Lucio Maurigh
    last modified by Lucio Maurigh
  • eDV 2015 bug: open a drawing, click rotate button, drawing will vanish

    Hi,   if you open a Solidworks Drawing and click the rotate button: the drawing vanishes: In 2014 rotate button was greyed out, so maybe you should not be able to click the button, but then the button need...
    Gerald Kratzert
    last modified by Gerald Kratzert
  • eDV 2015 bug: Run animate on a drawing will mess up drawing

    Hi,   open a drawing and run an animation: The animations runs, but the background is transparent: Stop the animation, and click Zoom to fit to see the whole drawing, a lot of parts are missing: Regards...
    Gerald Kratzert
    last modified by Gerald Kratzert
  • eDV 2015 Bug: Fastest speed option ignored at new start

    Hi,   SP3 fixed some bugs, thanks for that. eDrawings Viewer is sadly still far from eDrawingsViewer 2014 performance so I post some other bugs or inconsistencies. I start with a Graphics boost bug. I usually us...
    Gerald Kratzert
    last modified by Gerald Kratzert
  • "Old" style Edrawings buried inside SW2015 Explorer!

    Using SW2015 explorer today, I clicked on the "View" tab.  I discovered the "old" style Edrawings! Not sure how practical it is, but it's there in all it's ol' skool glory.    Spaceball works, browsi...
    Andy Sanders
    last modified by Andy Sanders
  • eDrawings 2014 SP4 doesn't update

    I'm not sure if this problem is relevant since 2 updates have been released since my version, but here is the problem, just in case it is relevant.  I have eDrawings 2014 sp4 ver. 14.4.0.105/ 14.4.105, installed ...
    Tom Kullinger
    created by Tom Kullinger
  • PDF .vs eDrawings Viewer

    I'm looking for input regarding pros and cons to using PDF files as "viewer" files compared to using eDrawings files.  I simply need production/management to view the drawings and wonder how others have accomplis...
    Cody Zorn
    last modified by Cody Zorn
  • Disableing Section Views in Edrawing Professional

    Wondering if there is a way to disable features in edrawings such as move component and section view? Thanks!
    jake kardash
    last modified by jake kardash
  • Measure is Auto-Disabled when i publish from SW

    When I use E-Drawing by itself it allows me to pic enable or not But when I publish one from SW file menu the tape measure always has a red line thru it?????? Hope somebody can help
    brian st.pierre
    last modified by brian st.pierre
  • SolidWorks World Top Ten list: Now open for Voting!

    Hi everyone,   Idea creation is now complete.  We are excited by the number of Idea submissions for the SolidWorks World 2014 Top Ten list. This year; we have the most submissions ever!   Now’s ...
    Salih Alani
    last modified by Salih Alani
  • SolidWorks World 2014 Top Ten List – Last chance to submit your new ideas before Voting begins on December 16th

    New idea submission will end on December 16, 2013 when we will transition into the voting phase (which will end on January 15, 2014).   Before the December 16, 2013 submission deadline, please be sure to visit ...
    David Hensel
    created by David Hensel
  • eDrawings is now available for the iPhone

    Just a quick update--both versions of eDrawings are now universal apps for iOS. If you already have either iPad app, you can use it on your iPhone as well. More info on our blog: http://blogs.solidworks.com/solidworks...
    Matthew West
    last modified by Matthew West