• How to completely Break link to Toolbox part

    Dear all,    I created a custom machine key from Toolbox and then, insert it back to Toolbox. But when I change the length of the key, its still link to original part. How to completely break that...
    Le Duc Ha
    last modified by Le Duc Ha
  • Adding a custom dimention to a Toolbox part

    I have problem with toolbox, I want to make a metric spur gear with a specific module (2.125mm) witch is not in the pre-determined modules available. the problem is when i try to add this mesurement. it appears that t...
    Philippe Chase
    last modified by Philippe Chase
  • Toolbox managed in ePDM leaves template files checked out after new configuration creation

    Hi all,   We moved our Toolbox in PDM last autumn and so far it seemed all went well. However now I as an admin have noticed that whenever some user adds a new fastener size, when the Toolbox does its automatic ...
    Kalle Seppälä
    last modified by Kalle Seppälä
  • Help fixing references: working with "configurations" to "parts"

    Hello, everyone. We are in the process to migrate from working with PDM standard to working with the 3DEXPERIENCE.   For those not knowing, working with toolbox in the 3DEXPERIENCE requires that all t...
    Carlos Orero
    last modified by Carlos Orero
  • Add To Smart Fastener Database

    I would like to add an additional length option to an already existing smart fastener.  Currently, 1 inch is the only option for a #6 self tapping screw.  I would like to add a 3/4" option.  I have look...
    Christopher Griffin
    last modified by Christopher Griffin
  • Add offset on smart fastener

    Is it possible to make the bolt offset from the surface that you select for inserting the fastener?   I cannot select the plate, only the beam in the "Selection"-box. Therefore the nut lays flat against the...
    Gustav Rydn
    last modified by Gustav Rydn
  • toolbox error straight miter gear creation

    Hello every one. I'm using SW2015 SP5. I've used the toolbox to generate 2 straight miter gears (one with 16 teeth, the second with 32) to have a ratio of 2:1. the parts generated don't fit. can some one help me ?...
    Renaud Petit
    last modified by Renaud Petit
  • Error Installing Solidworks 2020 Toolbox files missing

    Running into this problem while installing the software. Don't have a clue where these files are. Hoping for some help. 
    Syed Harris Hussain
    last modified by Syed Harris Hussain
  • Toolbox error: "SolidWorks must be running" When it is.

    Newly created Toolbox 2019 was set up during installation.  Problem occurs when you export data of a fitting to excel.  Open the excel file and add property columns and import back into toolbox.  All...
    Steven Atkinson
    last modified by Steven Atkinson
  • Have to add toolbox every time and missing toolbox component names in BOM

    Hey everyone.   I'm pretty sure I'm missing some toolbox settings because every time I start Solidworks 2019 I have to re-add the toolbox library. When I click the "Add in now" button the toolbox is instantly re...
    Gabor Fekete
    last modified by Gabor Fekete
  • Exporting Toolbox Hole Data Table to Excel not Working?

    I'm trying to export the hole data table via the toolbox settings wizard and it's not working.   I get to the "Save As" menu, but nothing happens after I press save (have tried both XLSX and XLS formats.   ...
    Slaven Prostran
    created by Slaven Prostran
  • What do you think if I modify the Toolbox model files adding some Custom Properties that will be useful for our PDM data card?

    Good Morning, the company I work for is transitioning from Inventor to Solidworks. I explored the toolbox and overall I believe is a great tool and I wish to accomplish some task I am not sure I can do properly. Besi...
    Paolo Magalini
    last modified by Paolo Magalini
  • Modified Toolbox parts Change back to Original

    Hi All,   I have a problem with gears I generated using solidworks Toolbox. I made some gears then went "Save As" and saved them in another located in my google drive. I then modified these parts.   I adde...
    Jordan Wortel
    last modified by Jordan Wortel
  • Parts not being created correctly by toolbox

    Hi, Has anybody had this issue before with toolbox? The parts seem to be right only in the default size:   Socket Head Screw:   The toolbox was in PDM but tried the local library and the problem is the ...
    Rafael Huk
    last modified by Rafael Huk
  • Toolbox equation errors

    Hi all, I am getting errors in tool box generated parts where the shapes of the parts are not generating properly.  Sometimes with bolts the head is a weird shape and sometimes the head is too large.  ...
    Calum Conduit
    last modified by Calum Conduit
  • Near Side countersink Data

    Does anyone know where or how the near side countersunk data on holes is either calculated or where it's repository is in the hole wizard?    It would appear that the Size is based on the OD of the hole som...
    Matt Juric
    created by Matt Juric
  • toolbox keeps replacing components

    Just installed 2012 SP02.   Our assemblies are small. Maybe 20 different bolts, screws and o-rings generally used. When we where running as stand alones, no issue with toolbox location. As we have grown in numbe...
    Brian Mayo
    last modified by Brian Mayo
  • ability to add a logo on a custom toolbox folder like ISO,IS ?

     is there ability to add a logo on a custom toolbox folder like ISO,IS ?
    Brahma Teja Kamma
    last modified by Brahma Teja Kamma
  • Toolbox and set SolidWorks material

    I'm not having success with setting the material of Toolbox components as they are created. I think it worked at one point yesterday, but now it is not.   I'm creating parts instead of configs. SolidWorks 2020.&...
    Brian McEwen
    last modified by Brian McEwen
  • Hole size changes in Hole Wizard

    Hi,   I have added some customized hole dimensions in the Whole Wizard (M14x1, M16x1, M20x1 and so on), that caused the following issue: when I go to Edit Feature of the existing Whole Wizard element, its size t...