• New Enhancements in #TASK 2.0?

    This is a question for Suraj Sethi. Also for all the users who subscribed to #TASK 2.0.   Before Artem Taturevych left Central Innovation, I remember being told that the new #TASK V2.0 will have a lot of enhance...
    Alin Vargatu
    last modified by Alin Vargatu
  • Does this forum have a #TASK thread?

    My company recently deployed #TASK to help with our SolidWorks rollout. There doesn't seem to be any community on the #TASK site, so I was wondering if we had a space here to discuss/to ask questions about the program...
    Kevin Gruscinski
    last modified by Kevin Gruscinski
  • Task Scheduler = mostly a toy ?

    Task scheduler was brought to my attention by some post here on the forum.   When I started to check it out and was thinking  WOW, this will be great. " "CAD productivity software for carrying out tasks" B...
    Peter De Vlieger
    last modified by Peter De Vlieger
  • SolidWorks TASK Issues

    We are using SolidWorks 2014. In Solidworks I can use SaveAs to save a multisheet drawing to a single multisheet DWG file. However, when I use the TASK Scheduler to do this to a group of files the multisheet files are...
    Peter Biggert
    last modified by Peter Biggert
  • Batch export STEP AP214 rather than AP204

    Morning again everyone, I played around with #TASK yesterday and managed to export over 100 STEP files from a single Assembly file using the configuration names as the save name and it worked brilliantly (although I ...
    Dylan Sinclair
    created by Dylan Sinclair
  • Task Scheduler not printing or converting to PDF

    We have used task scheduler for batch printing and converting drawings to PDF in the past and it was working for us a few months ago, but it isn't working right now. I'm on SolidWorks 2017 SP3.0 and we are just about ...
    B. Watkins
    last modified by B. Watkins
  • Can I use the Task Scheduler to initiate a workflow in EPDM

    Can I use the Task Scheduler to initiate a workflow in EPDM
    Damon Stocker
    last modified by Damon Stocker
  • TASK Scheduler Failed Unexpectedly while, I was Trying to create drawings for Parts and Assemblies.

    I was Trying to create drawings for some parts and subassemblies by using Solidworks Task Scheduler. But It doesn't work properly. Only Half the parts drawing has been made by Task Scheduler & rest of them remains...
    Puneet Bharti
    created by Puneet Bharti
  • #Task "Failed to Obtain a License of Solidworks Task Scheduler"

    I am running a SW 2017 Standard License and tried to use #Task to batch convert a bunch of .sldprt files to .step and I got the following error:   Failed to Obtain a License of Solidworks Task Scheduler "Could ...
    Joseph Walden
    last modified by Joseph Walden
  • task scheduler stops after solidworks crash

    If solidworks crashes task scheduler will not be able to close the program and it hangs on this.     Does anyone know a way to force close the program. and continue the task?
    Jovian Wysocki
    last modified by Jovian Wysocki
  • Task Scheduler adding info to Printed files

    If I use Task Scheduler to print files, each sheet comes out of the printer with an added note centered on the bottom of the drawing. It will say the sheet number in that drawing, but then specify it's only of 1. IE: ...
    Philip Blair
    created by Philip Blair
  • How do I remove the "space" from a formula generated DriveWorksXpress filename?

    For example: XX YY.sldprt, where X=fixed and Y=programmed variable text.  DriveWorksXpress adds a space between, but there is no space in the formula: =CONCATENATE("X" ,DOORMATERIAL ,"-",HEIGHT, LENGTH )
    Eric Fivecoats
    last modified by Eric Fivecoats
  • Task Scheduler - Printing uses a separate window for each print

    Ever since we updated to 2017 Solidworks we've had an issue with printing using task scheduler. Solidworks no longer wants to print all drawing from the same Solidworks instance.   When using the task scheduler ...
    Mark Buhler
    last modified by Mark Buhler
  • Task Scheduler missing many tasks in Task Sidebar in SW2017

    When I bring up Task Scheduler in SW2017, it only has a few tasks in the side bar as shown here:     As you can see, there are many tasks missing.   We are using SW2017 SP4.1 with SW PDM Client Vers...
    John Vincent
    last modified by John Vincent
  • Tasks scheduler molto più lento nella versione 2017, perchè?

    Abbiamo installato sw 2017 sp5 e riscontriamo dei grossi problemi con l'utilità di pianificazione sia sulla stampa sia sull'aggiornamento delle proprietà.
    dario Armanini
    last modified by dario Armanini
  • Create a custom serial number based on part type when a part is assigned.

    I'm having issues with getting this concept to work. So someone can create a part, but the only time the serial number will be generated is when the part is changed to the assign state. My add-in then checks to see if...
    Parker Roach-Reasor
    last modified by Parker Roach-Reasor
  • task scheduler render error

    Hi All,   I'm trying to use the task scheduler for rendering with photoview360. This is the error what I found and there is nothing I can find on internet about this. Can someone help me?   Regards,  ...
    Bram Piters
    last modified by Bram Piters
  • Task Scheduler: Retrieving task information

    Hi,         I had scheduler convert files for multiple files in a folder. Now the task scheduler displays the following message. See the screen shot below. This has been running for...
    Ananth Subramanian
    last modified by Ananth Subramanian
  • SOLIDWORKS TASK SCHEDULER DXF EXPORT - ADD REVISION NUMBER TO FILE NAME?

    Hi Guys   When using Solidworks Task Scheduler, does anyone know how to include the revision number of the drawing to the file name when I export drawings to DXF or DWG files?   Kind Regards Dee
    Diarmuid Boland
    last modified by Diarmuid Boland
  • Task scheduler not working properly, other options? #TASK?

    Hello Solidworks community,   I have been trying to use Task Scheduler to do simple tasks (convert/update files mostly) with mixed results. Quite often I simply get an error message like this:   I have s...
    George K.
    last modified by George K.