• metric pipe

    solidworks routing metric pipe in mm where how to convert to mm      
    Arif Akbas
    last modified by Arif Akbas
  • Please Fix Routing

    I'm losing my damn mind right now. I have a fairly large route that was almost perfect... Well, I had to add in some splits for grooved connections and/or field welds. Now EVERY. Single. Piece... on either side...
    Kyle Taylor
    last modified by Kyle Taylor
  • Is there any default settings which can make the notes without leaders?

    Every time when I flattened the route to make the drawing, the dimensions of the wire length were shown with leaders, so I changed the leader style under NOTES to "No Leader" manually and then saved, but all the leade...
    Alex Li
    last modified by Alex Li
  • How mate flanges in a route

    Hello everyone, maybe it has been asked in the past or it is a silly thing to search for but I'd lke to know if someone know hot to disjoint or unmate two flanges in a route assembly. I found myself in this bizarre s...
    Simone Stampatori
    last modified by Simone Stampatori
  • Tube Part extends past Cpoint after closeing route editor

    I have SW 2016 Premium Routing.   Once finish editing a route and close the editor, the tube part that SW creates ends up being longer than the point to point distance I define in my Route Sketch.   This m...
    Matt M.
    last modified by Matt M.
  • piping and routing database

    The  piping and routing database has the following columns Type Subtype Skey Filename Config name Size Path Schedule Class Part number (=utterly identical to Config name, so your guess is as good as min...
    Peter De Vlieger
    last modified by Peter De Vlieger
  • My Custom Tubing Elbow Disappears after I select "Add Fitting"

    Firstly, maybe someone can tell me - why are there not any Compression Tube Fitting elbows in the default routing library. For example a 90degree Parker Ferulok compression tube fitting. They have T's but no tubing el...
    Matt M.
    last modified by Matt M.
  • how do you add a pipe branch without having a flange

    Hi,   I am trying to model the attached image using routing but when looking to create the pipe branches that come off, I am unable to find a way to create them without having the flanges. These are not through...
    Wayne Price
    last modified by Wayne Price
  • Properties of Cables in Solidworks Routing

    So we are trying to use the "Link to Property" option on a note to link certain notes to routing properties. However, It appears that the routing properties aren't stored in the property tabs of the parts like other p...
    Eddie Pellegrin
    last modified by Eddie Pellegrin
  • route properties template

    Does anyone have any in depth information about it ?   To be very specific, I'm talking about the Route Properties Template that one can find when going into Routing Lbrary Manager and selecting Routing Properti...
    Peter De Vlieger
    last modified by Peter De Vlieger
  • FOF dimensioning issue

    The more I'm trying to use FOF dimensioning the more I seem to notice that it has limitations.   Namely in my experience you'll see things going awry if you happen to use a dimension from one face of flange to a...
    Peter De Vlieger
    last modified by Peter De Vlieger
  • How to make/edit a flattened electrical route?

    My question is not flippant. How can you flatten an electrical route and edit the flattened route? SW help has maybe 20 words to say on these subjects - none of them beyond repeating what is written in buttons and men...
    Ken Lux
    last modified by Ken Lux
  • Adding Slope to Pipe routing AFTER the pipe route is done!

    Hi all, i would like to ask how can we add a slope to a pipe segment after i finish that pipe route.    To be more specific, i finish a pipe route a few months ago, without any slope. My client just contact...
    Khoi Le
    last modified by Khoi Le
  • Routing Library

    Dear All, Will any one or more of you like to share the routing library other than the existing solidworks Routing Library. I will also share the same with you. If any site like http://www.3dcontentcentral....
    Sandip Darveshi
    last modified by Sandip Darveshi
  • Solidworks keeps asking to re-import the from-to list

    Solidworks 2010 Routing   I have a routing assembly with two ring connectors and one wire.  I used a from-to list to create the harness.  It behaved well for quite some time.  Now it keeps asking ...
    Sandi Southard
    last modified by Sandi Southard
  • Modification of P&ID data in SolidWorks possible????

    I know we can use the P&ID data very succeessfully in SolidWorks for making the piping and tubing connections, but my query is if I want to make some modifications or generate new   P&ID data will it...
    Yash Bhaskar
    last modified by Yash Bhaskar
  • P&ID Videos

    Anyone knows good source for videos & tutorials about creating P&ID and how to import it into SolidWorks.
    Mohammad Darabseh
    last modified by Mohammad Darabseh
  • End length adjustment

    Hi   I doing some tube routes, and noticed that I must of had the end length adjustment set to .400". But did not need any at all, and where the tube seats in the weld on flange fitting is now too long.   ...
    Jason Williamson
    last modified by Jason Williamson
  • How to add a non-pipe component to a spool?

    Anyone know how to add a non-pipe component into a spool? Is it even possible on Solidworks though?
    Khoi Le
    last modified by Khoi Le
  • How to change OD of wires/cores and cables after routing?

    Using SW 2017. I'm getting weird extremely large OD and bend radius of my cables in a test assy I'm working on, to learn routing. Could be some messed up unit conversion, I don't know. Anyway, I'd like to change the ...
    Daniel Lovas
    last modified by Daniel Lovas